More Categories
Company NewsWhat to do after the car is changed. Replace the valve.
2018-11-15 16:11:09 Hits：
Cars change tires, many friends have experienced, and many people have changed their tires in a hurry. In fact, after the tire change, the rush to open the car will leave a lot of influence in the future, therefore, some The items to be done after the car is changed must be understood.
It is important to replace the valve with a new one. The nozzle and its parts are made of rubber and therefore age over time. When buying a replacement tire, we should replace it at the same time.
At high speeds, aging, cracked rubber nozzles may bend due to centrifugal forces, causing air leaks. The gas leak is very slow and not easy to detect, but it is very dangerous if the tire continues to run at low air pressure.
The valve cap is equally important. Its main function is air isolation, which also helps to block dust and debris. We should regularly check that the nozzle and nozzle cap are in good condition, to ensure the air tightness of the tire and the correct tire pressure, and also to extend the life of the tire.
It is recommended to make a four-wheel alignment. The front wheel alignment includes the caster caster angle, the kingpin camber angle, the front wheel camber angle and the front wheel toe. Rear wheel alignment includes wheel camber and one by one rear wheel toe. In this way, the front wheel positioning and the rear wheel positioning are collectively referred to as wheel positioning, which is also commonly referred to as four wheel positioning. The role of wheel alignment is to keep the car in a stable straight line and turn light, and to reduce the wear of the car and the steering parts during driving.
A thousand miles, driving under the wheel. Want to travel thousands of miles, tire maintenance is critical.
It is important to replace the valve with a new one. The nozzle and its parts are made of rubber and therefore age over time. When buying a replacement tire, we should replace it at the same time.
At high speeds, aging, cracked rubber nozzles may bend due to centrifugal forces, causing air leaks. The gas leak is very slow and not easy to detect, but it is very dangerous if the tire continues to run at low air pressure.
The valve cap is equally important. Its main function is air isolation, which also helps to block dust and debris. We should regularly check that the nozzle and nozzle cap are in good condition, to ensure the air tightness of the tire and the correct tire pressure, and also to extend the life of the tire.
It is recommended to make a four-wheel alignment. The front wheel alignment includes the caster caster angle, the kingpin camber angle, the front wheel camber angle and the front wheel toe. Rear wheel alignment includes wheel camber and one by one rear wheel toe. In this way, the front wheel positioning and the rear wheel positioning are collectively referred to as wheel positioning, which is also commonly referred to as four wheel positioning. The role of wheel alignment is to keep the car in a stable straight line and turn light, and to reduce the wear of the car and the steering parts during driving.
A thousand miles, driving under the wheel. Want to travel thousands of miles, tire maintenance is critical.
Copyright ©2018 Cixi Shengbo Tire Valve Factory All rights reserved.
No.: Zhe ICP No. 18039751-1
No.: Zhe ICP No. 18039751-1